See All Product Images

2 4G WLAN 4W power amplifier engineering grade

2.4G WLAN 4W power amplifier engineering grade diamond warship RF600 Global Initiative

 
     
  • 2.4G WLAN 4W power amplifier engineering grade diamond warship RF600 Global Initiative
 

Specifications

Treasure of the market town, engineering class battleship - diamond industry's first 2.4GHz adjustable gain ( 10dB ~ 17dB ) signal amplifier!

The quality is the constant pursuit of refine on -link! Following the 2.3W power amplifier, we launched the 4W power amplifier, to meet to do wireless engineering cover the needs of friends. This product is the most clever two big innovation was: 1 realize adjustable gain; set aside 2 transceiver synchronization control port, for high data rate to achieve real " zero loss" transmission.

Product parameters:

Frequency ( Operating frequency )

2400-2483.5MHz

Mode ( Operating mode )

The two-way time division duplex ( TDD )

Signal standard ( Signal standard )

IEEE 802.11b / g / n

Minimum input power ( Minimum input power )

3dBm

Maximum input power ( Maximum input power )

23dBm

Nominal output power ( Standard output power )

33dBm (2W )

EVM

= 6.5%

Maximum output power

( Maximum output power )

36 dBm

(4W )

Uplink

gain ( Uplink gain )

15 + 1dB

Downlink

gain ( Downlink gain )

10dB

- 17dB ( 1dB adjustable gain can be adjusted step by step )

Noise

coefficient ( Noise Figure )

Less than or equal to 2.5dB

Delay

( Delay )

< 1US

Operating temperature

( Operating temperature )

-

10 Cto + 60 C

Weight

( Weight )

0.5kg

Route /

network interface ( Router Interface )

SMA female

( SMA Female )

Antenna interface

( Antenna Interface )

The RP-SMA male

( RP-SMA Male )

Antenna interface

( external screw needle - and red lights on one side only ): used for connecting the antenna, which can not be connected to any other active devices.

AP

interface ( external screw hole - and power interface on one side ): through the shielding cable to connect to AP / LAN Wireless equipment.

Indicator:

normal work but no data transmission when the indicator light, a data transmission when the lights bright flashes, data transmission more and more intensive, the indicator light flashes quickly

DC

: 12V 1000mA power adapter power supply ( positive and negative ).

Note

: This machine is of high performance DC-DC circuit, according to the construction environment, customers can choose a different way of power supply, power supply voltage between 9V-36V can be. If the 9V power supply, supply current must be greater than or equal to 1500mA;

The machine

internal ad hoc group of 4 dialing code switch ( the red dial switch ), such as the need to adjust the transmit gain, just open the machine cover, a control plate on gain adjustment dial key position can be corresponding emission gain!

Explain.

Dial switch

3 is used to adjust the gain. Through the adjustment of the three state of the switch, to change transmission gain.

Dial switch

fourth is used for setting the transceiver to switch control mode: fourth for" ON", transceiver to switch control mode for internal automatic detection and switching mode. When the fourth "OFF", transceiver to switch control mode for external control model. Factory default condition for" ON".

Note: This

machine are reserved for receiving switching external control function, to ordinary users do not recommend the use of this function ( from the router lead transceiver control line and the docking, and for ordinary users to use internal control transmission bandwidth is high enough, the transmission rate is subject to a broadband bandwidth ).

The

external control function is only used for building coverage, WLAN project laid on the data transmission requirements of high field, which can realize data rate real lossless transmission ( this function from 300M / 150M router internal lead transceiver control line directly control amplifier, such as the need to please contact the company after-sales staff functions, in the technical support personnel under the guidance of, or together with a wireless router with returns to the factory by the company technical staff to complete)

Packing list

:

Amplifier

RF6001 + high quality power supply 1 + power line 1 + shielded cable 1

Note: for the

works to do friends on antenna has its own special requirements, so this product does not need antenna, antenna friends please contact the treasurer another shoot, thank you ^ - ^