See All Product Images

24V DC Solar Water Pump DC50A 2450A 1pcs 3600L H

is_customized: Yes Power: Electric Structure: Single-stage Pump Brand Name: BLDC PUMP Pressure: Low Pressure Application: Submersible Standard or Nonstandard: Nonstandard Usage: Water Theory: Centrifugal Pump Model Number: DC50A-2450A Fuel: Electric Size & Weight: 105.5x84.54mm Weight: 500g Inlet: 27mm Outlet: 27mm Anti-slip connector Flow Rate: 3600L/H Static Head: 5m Power Consumption: 86.4W Rated Voltage: 24V DC Temperature: 100 °C Intelligent Speed: Yes

Specifications

DC50A-2450A has the largest flow rate 3600L/H among all of our pumps and it has the speed control function. You can adjust the speed of pump by manual potentiometer or 0-5V analog voltage, very easy! It can resist 100 degree water and has many other advantages as following:

• Small size but strong; Low consumption & High Efficiency;

• Safety - no spark, Explosion - proof; Low noise about 40dB;

• Submersible, 100% waterproof;

• Wide range of working voltage (5-24 volt); Maintenance - free;

• Can be used to pump water, oil, acid and alkali solution;

• Variety Power: DC electric source, Battery or Solar Panel;

• Soft Start with Low in-rush current, great for Soalr SYS;

If you don\'t need speed control function, choose DC50A-2450S will save your money, it has the completely same performance only without the speed control function.

Model: DC50A-2450A (3 phase pump)

Size: 105.5x84.5x64 mm	Weight: 500g	Material: Engineering Plastics
Inlet: 27 mm	Outlet: 27 mm	Heat Resistance: 0~100°C
Rated Voltage: DC 24V	Rated Current: 3.6A	Power Consumption: 86.4W
Static Head: 5 meters	Flow Rate: 3600L/H	Life Span: 30000 hrs
Plug: 5.5×2.1 DC Plug	Cable Length: 2 meters	Working: Continuous
Noise: about 40dB	Water Proof: 100%	Submersible: Yes
Driven: Brushless Magnetic	Self-priming: No	Speed Adjustable: Yes

Caution - some notes you must concern!

1. The positive pole is red or brown wire; the negative pole is black or blue wire.

2. Overvoltage, reverse wiring will burn the motor. Confirm your power voltage before connecting the pump, to ensure that it works under the rated voltage.

3. BLDC pump is not self-priming pump. It must be installed under the liquid level or completely submerged in the liquid.

4. Keep the water clean, prohibiting impurities from entering the pump. Some device such as filter will be useful.

5. Dry operation (operation without liquid in the pump) will damage the pump.

6. Head means water\'s height inside of a pipe, not the spraying height.

7. Flow rate is horizontal rate, if you need a certain height, the flow rate will be reduced.

8. When the head is at the height, the flow rate will be zero. You could choose the suitable pump refer to our Performance Curves.

9. Ensure the water clear, regular checks can increase pump\'s lifespan.

Dropshipping

We also offer dropshipping service. If you want to sell our products in your countries or your website. We can offer you all clear photos with no watermark for your website design. When your customer place an order in your website, you just need to place an order in our store, we will send the goods to your customer directly. It is easy and very convenient.

How to choose the right pump?

Some suggestion in my opinion:

First, confirm your operating voltage, current, head, flow, and the size of inlet & outlet. In general, there is no flow when the head achieve the maximum head marked by factory. So if you require the pump is able to meet a certain height and also meet a certain flow, you should choose a higher maximum head than you need. Please consult us or refer to the performance curves.

Second, confirm the shape requirements, such as the type of interface, the direction of inlet & outlet, etc.

Third, confirm the working environment, such as the temperature, the medium, etc.

Fourth, confirm the functional requirements, such as the time control, the motion control, the pressure control, the flow control, the speed control, etc.