Men s waterproof spy camera watch MP3 640x480 spy

Men's thin waterproof watch 640x480 spy digital video camera 4GB MP3

1.    Appearance and buttons

1. USB socket

2. Microphone

3. Camera

4. Operation button

5. Clock adjustment knob

6. Confirm button

7. Status indicator

2.    Product introduction:

This product is the first watch with high-definition video recording function and built-in memory, also named "Watch Camera". It may take both photo and video. With simple operation, elegant design and small size, it is easy to carry. Consumer likes it as a good tool of business, education, security, media, justice, tourism, medical care and so on.

3.    Operation instruction

a. Parts description

a1. Status indicator: status indicators (7) share one loophole. The red one indicates the state of video mode, the blue one indicates the state of photograph mode, and both indicators light up indicates the state of voice recorder.

a2.Button: Operation button (4): turns the system on and off, cycles the modes of video, photograph and voice recorder. Confirm button (6): start or stop taking video, taking photo and recording voice.

a3. USB socket: the 2.5-4 pin USB socket (1) is used to connect computer or charger. It is the Interface for data transferring and charging.

a4. Microphone (2): be used to get the sound signal.

a5.Camera (3): be used to get the image signal

a6. Clock adjustment knob (5): be used to adjust the time.

b. Power on/off

Power on:

With the system off, boot the system by a long press on the operation button, the camera begin system initialization (the blue indicator lights up), with the initialization completed, the blue indicator turns off and the red indicator lights up, then the system enters video mode.  

With the system on standby, hold down the operation button for more than 2 seconds, the blue indicator flashes and then turns off, indicating that the system is turned off.(Note: with the system under working conditions, you must press the confirm button first to make the system return to standby for turning the system off)

c. Mode switch

With the system on standby, you can cycle the modes of video, photograph and voice recorder by short press on the operation button.

d. Video mode:

With the system turned off, boot the system by a long press on the operation button, then the blue indicator lights up, with the system initialization completed, the blue indicator turns off and the red indicator lights up, at this time the system enters video mode, with a short press on the confirm button, the red indicator flashes 3 seconds and then turns off, now the system starts taking videos. During taking videos, if press the confirm button, the system will stop taking videos and save the video files to return to standby while the red indicator lights up.

e. Photograph mode

Turn on the system, with system initialization completed, switch to the photograph mode by short press on the operation button, then the blue indicator lights up. With each short press on the confirm button, you can take one photo and save it while the blue indicator flashing once, and then the system return to the standby for photograph.

f. Voice recorder mode

Turn on the system, with system initialization completed, switch to the voice recorder mode by short press on the operation button, then both indicators lights up, with a short press on the confirm button, both indicator flash 3 seconds and then turn off, now the system starts recording. During recording, if press the confirm button, the system will stop recording and save the voice recording files to return to standby while both indicators light up.

g. Removable disk

First insert the USB port of the equipment with a USB extension cable equipped for this equipment, and then connect to the PC's USB interface. With the right connection, you can find a "Removable Disk" drive in "My Computer" of computer OS. When the equipment has been connected to the PC, the blue indicator lights up and the red indicator flashes, this equipment as this PC's removable disk has started to work, you can easily check, transmit, copy and delete files via the computer. The video files was saved In the content named"\_DCIM\100MEDIA".If you want to uninstall the equipment, the USB extension cable cannot be plugged out directly to cut the connection with computer. Otherwise, it may cause data loss or corruption.

NOTE: For the difference of computer scheme and system version, the time of removable disk identifying will be different, so please take pains to wait, in the time please do not do anything. If the computer cannot identify the disk For the difference of computer scheme and system version, please try to plug in again. If still cannot identity it, please check your operation system, device, USB port and USB cable.

To protect your computer, please connect computer strictly as per the instruction .First using the USB connection cable which coming with the product, once the system show ※You can move the equipment from the system safely§, please plug out the computer USB first and then plug out the USB which connect with this equipment.

h. Webcam function

First you need to install the camera driver in your computer. Put CD equipped for a long time, run the file "driver.exe" in the CD to install the camera driver, then you can use it by the following operation method:

1.Holding down the confirm button, connect the equipment to computer, then it enters PC camera (webcam) mode. In the PC Camera (webcam) mode, you are available for this equipment into your computer's CD-ROM.

2. Double-click "My Computer ", then double-click this icon, now you can open the webcam. (NOTE: if you want to quit the webcam function, please unplug directly the cord connecting the equipment and the computer)

I .Charge

onnect to computer USB interface or charger with a USB extension cable equipped for video chat. In this case, charging will begin automatically. During the charging, the red indicator flashes and the blue lights up. Once the battery is fully charged, both indicators will shine simultaneously. Note: the battery built in the equipment is high-capacity lithium polymer battery. It can be used and charged at anytime without memory effect. But for this equipment, please charge battery to saturation after the battery runs out to activate the battery maximum capacity and maintain the standard working time. In order to maximize the capacity of battery, please keep charging for the initial five times of charging.

j. setup time

The system provides a function that the time can be displayed in the video file. You can set the time according to actual needs, the time format is "Year-Month-Day Hour: Minute:Second". Set it up as follows: connect the computer to find a removable disk, and then move the mouse on the document named "DCIM" and right-click, move the mouse on the "New" in pop-up menu, then click "Text Document" to create the document named "time" (the letters must be lowercase), Its extension is ".txt". Open the file"time.txt" and set the time with the format such as: 2000-01-01 00ㄩ00ㄩ00,("Year-Month-day and "Hour:minute:seconds" are separated by space, then save it. After unplug accurately the USB cord connecting the equipment and the computer, you need to boot the system to complete the time setting. Now the time of the video file will accord with the time that you have set. Note: Once you finish the time setting,you must unplug the UBS cord and boot the system so that the time came into effect.

K. Troubleshootinga.

a. Once the storage space is not enough, the system will save the current files automatically and turns off while both indicators flash three seconds. If you want to continue to use this video recorder, copy the necessary files to computer and delete the old documents in storage in order to free up enough storage space.

b. When the battery is insufficient, the blue indicator and the red indicator flash alternately about 3 seconds, then the system automatically save the current files and turns off, If you want to continue to use the recorder, please charge the battery.

c. If the video recorder stops responding due to improper operation or other unexpected reason, please hold down the operation button and the confirm button synchronously and release the operation button first to restart it.

d. If the system cannot be turned on, please check the battery power first, and then hold down the operation button and the confirm button synchronously and release the operation button first to restart it.

e. If it cannot record video and take photo, please check whether the storage space is enough.

f. If it cannot connect with the computer, please confirm your operation system, device and USB connecting are correct.

L. Parameters

M. warning

1.Application: Please strictly abide relevant regulations and laws. This product should not be used for 30 minutes to 1 hour after the indicators have indicated charge completed. The user is fully responsible for any illegal purposes.

2.Battery: Battery duration will decrease with repeated usage and age. If the system has not be used for its using purpose, please charge the battery fully before using.

3.File security: This product is not a professional storage device. It does not guarantee the integrity and security of saved files. Please make a backup of your important documents on the computer or other storage device timely.

4.Video quality: This product is not a professional video recording device. It does not guarantee the video effect can meet your expectations.

5.Operating temperature:0-40⊥.

6.Operating humidity: 20%-80%. This product does not have the waterproof function, So it can not work under the humid environment.

7.Shooting brightness: Please use it under suitable lighting conditions. Do not expose the camera directly to strong light, such as the sun light to avoid damage to optical devices.

8. Cleaning: Do not use it under the environment with high dust density to avoid the contamination of camera lens or other components. It may affect the working of camera. The camera lens can be cleaned gently by paper or cloth which is used to clean glasses.

9.Waste disposal: Be mindful of protecting the environment, not arbitrarily discarded this product, do not throw it into fire so as to avoid accidents.

10. Other matters: The product belongs to sophisticated electronic products. Please make sure that it is not damaged by strong impact and strong vibration. Do not use it in the place with strong magnetic or strong electric power.