-
100% Brand New.
-
Color: White
-
Sensor: Electrochemical sensor
-
Alarm Style: Per EN50291
-
Sensitivity/Alarm Time: Within 60~90 minutes at 50ppm concentration; Within 10~40 minutes at 100ppm concentration; Within 3 minutes at 300ppm concentration
-
LCD Displayer (optional): 4 digits LCD displayer
-
Audibility: 85dB ( at 1m distance ), Frequency 3 - 0.5KHZ
-
Standby Current: <50µA
-
Alarm Current: <50mA
-
Standby Mode: Green Led flashes once every 30 seconds
-
Alarm Mode : Red Led quickly flashes 4 times with unit chirping every 5 seconds, then repeat,
-
Low-bat Indicator: Chirp every 30s as battery lower than 3.3V with green LED flashing and Lb on LCD
-
Mal-function Indicator: Chirp every 30s with green LED out and Err on LCD
-
Power consumption: 0.3mW
-
Size: 10 x 10 x 3.5cm
-
Powered By: 3 x AA Batteries (Not included)
-
A perfect item for protecting your family from the dangers of carbon monoxide.
-
Advanced level of protection, easy to read with the digital display, even in low light conditions.
-
Displays the level of monoxide the unit is sensing.
-
Green LED: Flashes every 30 seconds to indicate the unit is operating properly. The green LED will also flash before reading is taken and when any button is pressed.
-
Red LED : When a dangerous level of monoxide is detected the red LED will pulse and a loud alarm pattern will sound. The monoxide alarm pattern is 4 short beeps, followed by 5 seconds of silence, followed by 4 short beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every minute until the device is reset or the CO is eliminated.
-
Test/Reset button is designed for weekly testing if it works properly and reset the unit during CO alarm.
-
Alerts users when batteries needs to be replaced.
-
This alarm is highly recommended to be mounted on a wall surface.
-
Compact, lightweight & easy to operate.