W1 Aluminum Alloy Torture Rack Rotary Liner Shader

This is W1 Aluminum Alloy Torture Rack Rotary Liner Shader Tattoo Machine Gold. It can be easily adjusted as a liner or a length. It is a wine for any tattoo artist looking for high quality tattoo machine!

Features

• New and high quality
• Can be easily tuned as a liner or a shader
• Strong, hardworking
• A special process, the dry little voice
• Fast shading
• Using high temperature heat treatment, unwarming for long time using
• Both Liner and Shader
• Its steady body and smooth vibration will make your tattooing much more professional
• This tattoo machine is a -quality beauty product with everything you′ll need to tattoo
• Perfect for any tattoo artist looking for a good quality tattoo machine
• Comes with a screwdriver, conveniently installation and repair

Specifications

Model	Torture Rack
Construction	Casting
Frame Material	Aluminum Alloy
Recommended Use	Multi-use (Liner or Shader)
Capacitor	47μ/22V
Working Voltage	8-10V
Starting Voltage	4V
Optimum voltage	5-8V
Running Speed	9000-10000 R/Minute
Capacitor	47μ/22V
Contact material	Pure copper
Binder Material	Brass
Color	Gold
Dimensions	2.40 x 0.79 x 3.58 / 6.1 x 2 x 9.1 (L x W x T)
Screwdriver size	1.89 x 0.51 x 0.04 inch / 4.8 x 1.3 x 0.1 cm
Weight	110 g/3.88 oz

Package Includes

• 1 x W1 Aluminum Alloy Torture Rack Rotary Liner Shader Tattoo Machine Gold
• 1 x Screwdriver

Extra Info

Why the machine cannot start

Malfunction	Solution
The spring pole does not the contact point of the slanting spring	Loosen the screw of spring pole; rotate down the spring pole to the contact point, and then rotate it through 180°-360°. Tighten the screw to lock the spring pole
The switch is off	Connect 220V AC power supply and turn on the switch. The indicator flashes red
Both of Adjustable knob (VOLTAGE) and V meter hand are in "0"	Rotate the adjustable knob clockwise slowly. Simultaneously, V meter hand is also moving. V meter hand should stop at 10V-12V
The spring pole touches the contact point of front spring so tightly that the machine cannot start, which maybe even cause short circuit. Turn on the switch, the indicator flashes green (No Voltage)	Loosen the screw of spring pole; rotate up the spring pole for readjustment to the contact point, and then 180°-360° rotation. The indicator is green after it is short-circuited. Turn off the switch and then on again, the indicator will be red.
Disconnect the cord from joint position owing to careless jerk during the daily working	Check the foot switch and the plug
The wires are broken while washing and sterilizing the tattoo machine	Confirm the broken wires condition and have them welded
Turn on the switch when short circuit happens, and the indicator turns green	Check whether the plugs of cord and foot switch are broken or not. The damaged ones could cause short circuit, which should be welded with electric iron.