See All Product Images

X3000 double lens Rear camera GPS G Sensor Built

X3000 double lens Rear camera GPS G-Sensor Built-in car dvr, 120 degrees wide-angle Super High Definition car black box 2.7 inch display Motion detection Free Shipping

Specifications

 

Features:

1

dual lens, 120 degrees wide-angle function.

2

built-in 3G-GSENSOR gravity sensor.

3 an external GPS function, restore the driving track. Emergencies encryption protection, never cover.

4 a loop recording function, and automatically delete old files recorded in the new file.

5 with seamless video capabilities to ensure seamless seconds of recorded events.

6

support the recording of the video file switch functions.

7

with reverse video capability.

 

Specifications

 

Specifications may be changed as upgrade or update, please subject to actual product.

 

LCD size

2.7inch TFT screen(16:9)

LensRear camera   720*480Front camera   VGA/720P  30frame    720*480  25frameFront and Rear camera  VGA/1M/2M/5M)(Speaker5V  1000MA1min/2mins/5minsSupport SupportOptionalSupport 

1 x X3000 CAR DVR  

1 x Bracket  

1 x switching cable

120degree HD wide angle lens

Pixel

1.2megapixel

Rotation

Front camera

45degree   Rear camera360degree

Video resolution

Front camera   VGA/720P

Video frame rate

Rear camera

Photo resolution

EGT Video format

MOV

Photo format

JPG

Memory card

TF card512M-32G

high speed card is recommended

Record

Microphone

Sound

Language Simple Chinese/ Traditional Chinese/ English/Russian/Spanish/German

Frequency

50HZ/60HZ

USB port

USB2.0

Car charger input

Battery

Polymer built-in lithium battery  850mAh

Video resolution

VGA/720P

Video time

AV-IN

G-SENSOR

GPS function

Microphone/speaker

Support

Shut screen Record

Yes

Motion detection

Accessories:

1 x Rear camera  

1 x G-mouse (Optional) 

1 x Charger    

1 x USB cable    

1 x Manual   

 

Battery charge

A. Connecting with PC to charge

Charge the camera by connecting with PC and the data can be transmitted at the same time.

B. Charge by cigarette charger

Note: The red light indicator will be on for long time during charging. It will be off after full charge.

C. Charging time and working time of battery

Charging time

Continuous play time

Video time

About 4.5hours with starting up charging

About 2hours

Dual lens: about 50mins

Single lens: about 1.5hours

About 4hours with shutdown charging

It is better to use the car charger/charger from our company, to avoid unnecessary danger.

If not using our company accessories, please check if the electric specification of charger is accorded with our product.

 

The battery working time will be shorten after long time use

Long time charge will reduce battery working time, and may cause further damage on the battery. If long time not using, please full charge before use.

Note: If it is used in the first time, the battery should be charged at least 12hours and make sure charging at shutdown status.

 

Menu

VGA/720PTimeFront camera/Rear camera/Dual camera

Video

Resolution

1min/2mins/5
mins/OFF

Video mode

White balance

Auto/Fine/Fluorescent/Cloudy/ Incandescence

Exposure

-3/-2/-1/0/1/2/3

Color

None/Monochrome/Negative film/Retro/Reseda

Mobile sense

OFF/ON

Time watermark

OFF/ON11/12/13/14/15Screen protectionPhotographResolutionExposureOFF/ON50Hz/60HzDateOK/CancelMenu settingC. Record mode settingB. Connecting with car charger in the status of shutdown, the device enter into video mode automatically and video starts, green light blinks.    Press” ON/OFF” for long time in the status of starting up, the device is shutdown.Take off car charger in the status of starting up; the video will be ON for 15seonds. File will be saved and the device is automatic shutdown.3. Memory card after starting up, the green light blinks. Press “OK” to save files and video stops. Green light is on for long time. The device enters into standby status. Press ”OK” to enter into VIDEO MODE in the status of standby, the green light blinks.In the status of standby, press “MODE” to enter into PHOTOGRAPH MODE. Press “OK” to photograph, you will hear prompt tone at the same time. Press UP to switch into the display of “picture-in-picture” in the mode of photograph, at this time, you can use Dual Camera to photograph at the same time. The photos from front camera and rear camera will be saved separately, respective to the filename DCIMA and DCIMB.In the mode of standby, press DOWN to switch cameras. Factory setting is the working mode of dual camera (Display “A+B”). The video file recorded from front camera and rear camera is saved separately, respective to be saved in the filename DCIMA and DCIMB. Press DOWN, it will be switched to Front Camera Display mode. If the picture shows A camera, the video file of front camera will be saved to DCIMA. If the picture shows B camera, the video file of front camera will be saved to DCIMB. Press it again,it will be switched to dual camera. The order is Dual camera video working to Front camera video working, to rear camera working, to dual camera working.

Record

OFF/ON

Video

OFF/ON

Language

Simple Chinese/ Traditional Chinese/ English/ Russian/Spanish/German

Frequency

50Hz/60Hz

Keypad tone

OFF/ON

Sound volume

1min/2mins/3mins/5mins/OFF

Date

YY/MM/DD

Format

OK/Cancel

Factory setting

OK/Cancel

VGA/1M/2M/5M

Photograph mode

Front camera/Rear camera/Dual camera

White balance

Auto/Fine/Fluorescent/Cloudy/ Incandescence

-3/-2/-1/0/1/2/3

Color

None/Monochrome/Negative film/Retro/Reseda

Time watermark

Language

Simple Chinese/ Traditional Chinese/ English/ Russian/Spanish/German

Frequency

YY/MM/DD

Format

OK/Cancel

Factory setting

 

1. Press” ON/OFF” to power ON, the device is in standby status. Press ‘Menu” to set. Press “Mode” continuously to enter into submenu, and then press UP or DOWN to select menu. Press “OK” to change the setting and press “Menu” to save and exit.

A. Resolution setting

B. Loop record time setting

 

2. System setting In the status of standby, press “Menu” to enter and press “Mode” for four times to enter into” System setting”.

Press UP or DOWN to select menu, press “OK” to change the setting and press “Menu” to save and exit.

 

Function operation

1. Starting up

A. Press ON/OFF for 3seconds in the status of shutdown, the device will enter into video mode and video starts, green light blinks.

 

2. Shutdown

A.

B.   

When the lithium battery is low, the screen will show Low battery. Files will be saved and the device is automatic shutdown.

 

Memory card installation: Insert the memory card into the slot as silk-screen indication.

Memory card remove: Push forward the memory card. It will be popup. (It is better to remove in the shutdown status, to avoid damaging memory card.)

Note: If there is no memory card, the LCD screen will show “NO SD card” after starting up.

Please install SD/SDHC card correctly. The side with metal is downward. No metal side is upward.

 

4. Video

It will enter into VIDEO MODE

 

5. Photograph

 

6. Switching of cameras

 

7. Picture in Picture setting Press ON/OFF to enter into Starting up interface. Then press DOWN to switch into “Picture in picture”,

 

8. Playback and Delete

In the mode of standby, short press MODE for twice, it enters into PLAYBACK Mode. Press UP or DOWN to select required preview file. Press OK to play or stop. If you need to delete files, press MENU to enter into DELETE menu. After pressing OK, it will enter into “DELETE FILE”: OK/CANCEL. Press OK to confirm and exit, it will be back to PLAYBACK MODE.

 

9.  about AV-IN

A.  Insert AV-IN camera plug into AV-IN port of the device (Plug in and out at the status of Starting up is not supported).

 

B. After Power ON, press DOWN to switch CAMERA DISPLAY mode. After switching to Rear camera, the screen shows as below picture. At this time, you can see the situation at the back of your car and back off. Between green line with yellow line, it is the distance of safety. You can park according to actual environment. Between yellow line with red line, it is the distance of alarm. You should park. Within the Red line (Shows STOP in the picture), your car is very close with

obstacle. It is dangerous distance and collision may happen.

 

10. G_SENSOR function (Optional)

Support G Sensor (Gravity sensor). When the car crashes, it will save the video of 10seconds backwards and 30seconds forwards. The filename of the saved video is started with ZW and the file can not be covered.

 

11. The usage of switching cable

The male plug of switching cable is plugged into the device. One terminal (marked GPS) is to connect GPS. One terminal (marked Charge) is to connect car charger.

Note: GPS and Car charger can be used separately. In the separate usage, just insert the cable into USB port directly.

 

12. GPS function (Optional)

During Video or Photograph, it could record where you are videoing or photographing. Video and photos can be played or browsed in the PC. If you want to check driving track, please install software in the attached CD, CARGPS VIDEO. In the Play interface, you can watch the video and see the geographical location at the same time.  

When you don’t use GPS, a red × is on the GPS icon. After GPS used, GPS icon will be turned into light blue, which means GPS is working.

 

Connecting with PC

Download of video and photo

1. After connected with PC by USB cable, the camera screen will show MENU SETTING, USB-Disk/PC-Camera/REC-Mode.

2. Select USB-Disk, the device will show the icon of USB. Removable disk can be detected automatically by PC.

3. While browse and manage file in the PC, the filename started with AW is general file. The filename started with ZW is the file generated by G-SENSOR.

4. The device can be used as video tool of instant communication software when PC-camera is selected.

5. The device can be charged and recorded at the same time after REC-Mode is selected.

6. The camera will be closed after USB cable is pulled out.

Remark: When system halted by mis-operation, press RESET and then power on. The device will return to normality.

 

Caution

1.

     

Use soft and dry cloth to get rid of dust. Do not use organic solvent such as diluents or banana oil.

2.      Don’t repair, dismantle or modify this product.

3.     

Don’t use the product in the place where is forbidden to use electrical equipment.

4.

     

Don’t operate and set this product during driving. If needed, please proceed it before driving or stop driving.

5.      Don’t use battery and car charger which are not produced by our company, to avoid potential danger.

6.     

Don’t use the product in strong electric field and magnetic field.

7.

     

Electromagnetic interference may destroy storage card.

8.      Please put the product far away from children.

9.     

Don’t put the product in moisture place such as bathroom.

10.

   

The waterproof function level of rear camera (AV-IN) is IP67/IP68.

11.    It’s better not to use the product under water.

 

  =======================================================================================

Payment Method: Paypal, West union, etc.

---------------------------------------------------------------------------------------------------------------------  

Shipping: 

  We will use EMS, DHL or UPS when Order Total Value more than 200USD: Arrive in 3-7 Business days, Usually within 5 business days. tracking Number is available.  

Within 200USD, it will be sent out by Singapore Airmail post or Hong Kong Airmail post, which always needs 12-20 business days to arrive, usually within 15 business days.  tracking Number is available.

  ---------------------------------------------------------------------------------------------------------------------

Returns:

  We do our best to serve our each customer the best that we can.

We will refund you for items returned within 7 days of you receiving them, for any reason. A full refund will be given if items are returned in their condition.

  Merchandise which is damaged or missing components is not refundable.

Buyers are responsible for return shipping with proper packaging.

On receiving items, we will refund you immediately. --------------------------------------------------------------------------------------------------------------------- Warranty & Maintenance:

 

We provide 1 month replacement and 12 months maintenance warranties. Items can be replaced during the first month or maintained for the first year. ***** Buyers are only responsible for the return shipping fees for warranty items.(In most cases, buyer will only have to return the problem components rather than the entire package.). 

 

Before returning items, please make sure you get our (the seller’s) return address, and write “gift” on the delivery detail sheet. Please use regular postal service and send us the tracking number. As soon as we receive the items, we will repair or exchange them ASAP. ---------------------------------------------------------------------------------------------------------------------

Feedback:

We desire for buyer positive feedback, Your positive feedback improve our business & services. if you feel unsatisfied and considering to left negative feedback, Please contact us first then we can try to found the way to make everyone Happy. Your satisfaction is always our No. 1 priority. Our positive feedback will send once the parcel were shipped.the parcel were shipped.