| Machine Dimensions: | 525X400X370mm |
| Rack material: | 6061 and 6063 Hard aluminum alloy
(The unique and dedicated mold extrusion profiles, Let counterfeiters dwarfs.) |
| Engraving area: | 300X200mm |
| Z- Stroke: | 45mm, Engraving depth depends on the length of the tool edge) |
| Acceptable material thickness: | ≤60mm |
| Rail type: | Chromeplate shaft+Linear Bearings,)(Surface hardening 61HRC) |
| Type of screw: | Ball screw,Pitch 4mm |
| Spindle motor: | 230W/11000r/min((Very small noise)) |
| Collet type: | ER11,1/8"(3.175mm) Collet |
| Stepper motor and drive: | two-phase hybrid stepping motor , 1.8A/PHASE,40N.cm, 8 segments drive. |
| Maximum operating speed: | 4000mm/min (Engraving speed : 300-3000mm/min) |
| Repeat positioning Accuracy: | 0.04mm |
| Communication interface: | Parallel port (Must use the desktop computer, Does not support laptop) |
| Software Compatability: | /Emc2/Kcam, (Type3,Wentai, ArtCAM,coppercam) |
| Command code: | G code/.nc/.ncc/.tab/.txt |
| Machine weight: | 22kg |