Specifications
lcd screen separator third generation built-in vacuum pump LCD separator machine for samsung/iphone galaxy rapair
Package Contents:
1 x Vacuum LCD Separator
1 x Cutting Line
1 x Power Cable
Instructions:
Temperature adjustment: (recommended exercises three times a bad screen separation (100 degrees) is set to 100 degrees, warming up, press the screen up, press the screen too will feel hot hand pressure can be separated (--- in addition to plastic - on glue - curing) repeated three times, and then do a good screen.
1. divided
The key point 1 on the screen (on fast fast under) principle. 2 Cut the wire to do the bottom shelf, below the level of the screen, - when the drop-down Do not worry, slowly about (magnitude) to a large, pull down until the separation (one not) can return the knife two or three times, until you feel separating, so lift line. Video is to look at these key points within the action: Do not worry when the dropdown is steel wire to wire against the cylinder near the drop-down slider, radian not large, so pull to a large extent.
2. in addition to plastic
Supporting the glue solution is a dedicated special, after the separation of sticky glue solution slowly with a clean cloth to wipe clean.
3. the oca glue
Due to the impact on the plastic screen finished effect, so to practice more, the amount of words can not be said clearly. As long as they go full screen on the line. Skills, (to prevent bubbles there, when we must put the glass slowly, watching glue, do not let him have a bubble, do not put hand pressure, and let it slowly sink. Waiting glue themselves to go over the entire screen.)
4. the curing
The key point of the curing process: the good of the screen according to the curing lamp for 1-2 minutes, then take out (this process is called pre-cured), the clean side of the glue, and then put light curing, curing typically 8 - 15 minutes.
Payment
1. We accept the payment by on line and PayPal.
2. When you payment, please leave your correct address and phone number, we only ship the product to the address you left.
3. Buyer is liable for impact due to wrong shipping address and phone number.
4. Immediate payment is required.
Shipping & Delivery
1. Transportation Tips
The goods over 2.5KG we send via ruston or XRU russian Special to Russian.the Brazil customer if you choose the DHL or FEDEX,the VAT number is required.
Our warehouse is located in UK, due to distance concern, shipment may have potential very low risk of partial damage or loss, especially to below countries: Lithuania, Spain, Italy, Sweden, Portugal, Latvia, Estonia, Finland, Romania, Bulgaria, Greece, and Greek Irelands, Poland, Czech Republic, Slovenia, Slovakia, Hungary. As an ShopMadeInChina honest seller, we fully take liability of above unwanted issues. To perform after service, from buyer side, do it yourself ability is required as per service guideline. please kindly ensure you are aware of that before payment.
3. Problems always happen, we pledge to do best to solve problem. We welcome everyone to communicate with us in ShopMadeInChina community. But, just in case, anyone open dispute/negative feedback without bilateral communication. It is not welcome and we definitely drag ShopMadeInChina ID to block list.
4. If you don\'t received your item (Post is economic but poor service quality. It may have some risk item loss) within the regular transport time, please contact us by Trademessage or Skype as soon as possible, we will deal with it within 24 hours and make sure your satisfaction, through communication, we can give you a refund or a replacement product. Please don\'t arbitrarily open disputes and leave a neutral/negative feedback without any communication with us.
5. If the goods you receive are partial damaged or don\'t match with the item description, please take some photos and videos and sent them to us as soon as possible. After checking the photos and videos, we can reissue products or accessories to you. Please don’t arbitrarily open disputes and leave a neutral/negative feedback without any communication with us.
Customs Tax & Duty
1. As long as item location is China (Except for the United States), all the parcels bound to target countries subject to tax&duty. For specific tariff, please kindly contact local customs house For specific tariff. All tax&duty are at buyer’s expense.
2. When parcel arrives at inbound country customs house, buyer is liable to clear cargos according to customs staff requirement within certain period. The clearance period is determined by local customs and not included in estimated shipping time.
3. For each parcel, we will take a declaration of 60% the total value of goods .If you have special requirements for details, please leave a message! Thank you!
Return Policy
Repairing: In most cases when item got problems we shall send you necessary parts with free cost For each parcel;t return the machine to us for the product value of the declaration. And we shall provide online technical guide for your own replacement so you needn\'.
Exchange: All items from us will be entitled to a 1to1 exchange if you find the item is faulty within 14 days when item is signed. Please note returning item must IN SHAPE,that means this warranty DOES NOT COVER damage caused by mishandling, abusing, alteration, neglect, disassembly or dropping. After checking we shall send you a new set. Buyer take liability of returning cost.
Return: We offer refund if the item is not to your liking. 25% restocking fee will be applied on all kinds of refund. And the returning cost would at the buyer\'s responsibility.
Customer Service Support
Feedback
1. Our service may be not best but pledge to become better and better.
2. If you have any displeasure on our product, please no hesitate to tell us. We will help you to solve it. Your satisfaction is our first priority. We appreciate your positive feedback.
3. We sincerely ask you not to leave negative feedback before contacting us. No seller can ensure no problem but value how to solve problem.
4. Any unfriendly behavior is not welcome, such as neutral/negative feedback without any communication with us. We will add you in our block list and not deal with you anymore. Thank you for repairing.